Phone: 07517 675415 or 01233 630366
Email: info@e-fms.co.uk
Connect With Us:
Please share this page:
MACHINERY FOR SALE
Turbovac D30 Vacuum Packer
The Turbovac D30 vacuum packer is constructed from stainless steel with a stainless steel chamber. The vacuum packer’s electrical parts are all covered by IP65 water and dust level protection and the chambers are easily cleaned after use.
The vacuum packer has a digital control panel that can store up to 10 different programmes. Each programme can be set with individual settings for the packaging of different types of product, this reduces the amount of down time needed when changing over from one product to another. The control panel of the vacuum packer comes with sensor control which allows the operator to set the exact amount of vacuum they would like to achieve which each product and it is accurate to within 1mBar of vacuum pressure.The digital control panel also tell the operator when the vacuum packing machine requires a service.
The D30 vacuum packer comes with four seal beams all of 820mm in length with a distance of 700mm between each pair. There are two seal beams in each vacuum packer chamber and they create a double seal imprint on the vacuum bag /pouch. The D30 vacuum packer can be fitted with seal and cut off at an extra cost, with each wire being controlled separately by the digital control panel.
There are various different vacuum packers available in the D-range so if you think this machine is not suitable for your needs take a look at the D60, D10 and D40 vacuum packers.
Description
External Dimensions (WxDxH) 1870x1100x1230mm
Usable Chamber Dimensions (WxDxH) 820x700x250mm
Seal Length 820mm double seal in each chamber
Cycle Time 20-35 secs
Voltage 400-3-50Hz
Power 6.2-9.7kW
Weight 600kg
Pump Busch 160m3
Vacuum packer options (please call for pricing)
Gas flush
Related products
-
Turbovac T40 Tabletop Vacuum Packer
The Turbovac T40 vacuum packer comes with a choice of Busch vacuum pump, 016 or 021m3. The 016m3 vacuum pump is the perfect choice for restaurants and smaller butchers shops where the vacuum packer is not used that frequently. The 021m3 vacuum pump is for more frequent use of the vacuum packer. The T40 vacuum packing machine comes complete with a seal beam capable of sealing a bag of 420mm in width and the distance from the seal beam to the back of the chamber is 370mm. It creates a double seal on the bag and can be easily converted to seal and cut off just by changing the wire type. The vacuum packer is constructed in stainless steel and has no wires in the chamber to improve cleanliness and reliability. The vacuum packing machines lid features a floating hinge system which prevents damage to the lid if anything is caught between the lid and the chamber. The Turbovac vacuum packer has digital controls where the vacuum time and seal time can be individually adjusted to suit different products and bag types and has a warm up button to get the machine and vacuum pump up to temperature before vacuum packing commences. Vacuum packing couldn't be simpler, place the product in a vacuum bag or pouch place into the chamber overlapping the seal beam and close the lid. When the vacuum packer lid closes the vacuum cycles starts ans when it is complete the lid opens automatically. -
Turbovac TV55/75 dip tank
The Turbovac TV55/75 dip tank is the biggest dip tank machine we sell. Suitable for commercial use and extremely easy to use the TV55/75 dip tank is one of our best selling machines. The dip tank is made from stainless steel to Turbovac's usual high standards. On the side of the dip tank is a drain tap for when you are cleaning down at the end of the working day. The dip tank platform has a loading capacity of 30kg at any one time and can hold upto 140 litres of water. Once the temperature has been set you want to dip at, siply pressing the start button puts the machine into its cycle. -
Turbovac D10 Vacuum Packer
The Turbovac D10 vacuum packer is made from high grade stainless steel, the D10 vacuum packer is a great choice for your vacuum packing requirements. The D10 vacuum packing machine has a swing over lid that is balanced on lid springs to enable the operator to move the lid across with very little effort. The advantage of using a double chambered vacuum packer over a single chambered one is that the operator can be preparing the next lot of products and positioning them correctly in the chamber whilst the vacuum packer is vacuum packing more products in the other chamber. This speeds up the vacuum packing process considerably. The control panel for the D10 vacuum packer is fully digitally controlled, featuring a sensor control that is accurate to 1Mbar and continues to pull a vacuum until the set amount is reached. This sensor control can reduce vacuum packing time and enables the operator to create the same amount of vacuum for every product they pack. The D10 vacuum packer comes with four seal beams, two in each chamber, which are positioned to the front and rear of the chamber. They are 620mm in length and the distance between the two is 520mm. Each seal beam creates a double seal on the vacuum bag, however the machine can be upgraded so that cut off wire can be used to replace one of the seal elements and the two different wires are controlled independently from the control panel. The vacuum packer can be easily cleaned, maintained and serviced. The control panel features something called 'service management' and this tells the operator when the vacuum packer requires a service. All the electrical parts of the vacuum packing machine are covered by IP65 water and dust level protection. The vacuum packer is also fitted with a world renown Busch vacuum pump, Busch coat all the internal components of the vacuum pump to further improve their life.The pump fitted as standard is 100m3 but you do have the option of a 160m3 pump if you would like the vacuum packer to complete its cycle a bit quicker. -
Turbovac D60 vacuum packer
The Turbovac D60 vacuum packer comes with sensor control as standard allowing for a more exact vacuum each and every time you use the vacuum packer. The vac packer comes in either a 1ph or 3ph electric supply and each chamber has two seal beams of 600mm in length situated and the front and the back for the chamber. The machine is built from stainless steel and has a painted aluminium chamber. All Turbovac vacuum packers are built using the world re-known Busch vacuum pump, giving you peace of mind that what is driving the machine is Busch's technology and expertise in the vacuum packer industry.
Please share this page
Elite Food Machinery Limited,
Unit 7 Chunnel Industrial Estate,
Victoria Crescent, Ashford,
Kent TN23 7HL
Email: info@e-fms.co.uk
Phone: 01233 630366
Mobile: 07517 675415
Company Information
Company Number: 9847799, Registered Address: 39 High St, Battle, East Sussex TN33 0EE
VAT Registration Number: 232 6447 18
Expertise
We also have experience with Audionvac, Henkelman, Turbovac, Multivac, Webomatic, Surevac, Samic, and Tepro Vacuum Packing Machines
© 2026 Elite Food Machinery Services